Cnf.showuser - Shows User Specified Settings; Cnf.showdefault - Shows Default Settings - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
3.2.2.4
Command syntax
Examples
Responses
Command description
This command delivers all parameter names that are modified/added by the user.
Parameter description
none.
Notes
• Except default configuration, all other parameter names with their settings are
delivered.
3.2.2.5
Command syntax
Examples
Responses
Command description
This command delivers all default parameter names. See default settings listed in
chapter 6.9
Parameter description
none.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE

Cnf.ShowUser - Shows user specified settings

$PFAL,Cnf.ShowUser
$PFAL,Cnf.ShowUser
E.g.
$DEVICE.GPS.STARTUP=on
$DEVICE.GPS.TIMEOUT=1,30
$DEVICE.GSM.STARTUP=on
$DEVICE.IEEE.STARTUP=off
$DEVICE.IGNTIMEOUT=60000
$DEVICE.SLEEP.IGN=1
$DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"","$<end>"
$DISP.MENU1.0=Phonebook
$DISP.MENU1.1=Office:GSM.VoiceCall.Dial,"+49200000000"
$DISP.MENU1.2=Home:GSM.VoiceCall.Dial,"+493600000000"
$DISP.MENU2.0=Messages
$DISP.MENU2.1.0=Incoming SMS
$DISP.MENU2.1.1=Last SMS:DISPLAY.Show=VIEW_SMS
$DISP.MENU2.2.0=Outgoing SMS
$DISP.MENU2.2.1=Last SMS:DISPLAY.Show=VIEW_SMS
end so on ...

Cnf.ShowDefault - Shows default settings

$PFAL,Cnf.ShowDefault
$PFAL,Cnf.ShowDefault
E.g.
$DEVICE.SERIAL.BAUDRATE=115200
$DEVICE.GPS.BAUDRATE=38400
$DEVICE.COMM.SERIAL=cmd,F
$DEVICE.CMD.PFAL.EN=F
$DEVICE.PFAL.SEND.FORMAT="$",CKSUM,"","$<end>"
$DEVICE.BAT.MODE=always,3.55
$DEVICE.IGNTIMEOUT=60000
$DEVICE.SLEEP.IGN=1
$DEVICE.GPS.STARTUP=on
$DEVICE.GPS.AUTOCORRECT=off,5.0,127,50,10
$DEVICE.GPS.TIMEOUT=1,30
$DEVICE.GPS.CFG=3
and so on ...
page 260.
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 79 of 271