Tcp.client.alternative - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND

3.2.23.2 TCP.CLIENT.ALTERNATIVE

Parameter syntax
This parameter defines an alternative server in case the primary server fails. This
allows to define a fallback server which can be used in case the primary server gets
disconnected/doesn't respond anymore. If both servers aren't available, the device
continues to attempt a connection (alternately to defined "primary" and
"alternative" server). A wait time between 2 connection attempts can be specified
using the setting TCP.CLIENT.TIMEOUT.
<a_enable>
Enables/disables automatically connection to the remote server. Following
values can be used:
Value
0
1
<a_ip_address>
IP address in dotted-four-byte format. It is the IP address to which the MAMBOII
will be registered and send its data. The format of this address is "xxx.xxx.xxx.xxx".
It is also possible to specify a DNS address in the form (for example
www.falcom.de) instead of a static IP-address. In such a case it is not required to
set up any DNS provider, it is automatically done.
<a_port>
Specifies the port number used for communication between the MAMBOII
device and alternative remote server. See also PORT description.
How the configuration could be set/requested:
Set configuration
Get configuration
Notes
•
All values are separated by commas ",".
•
Contact your network administrator to specify a correct server IP address and
port number.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
TCP.CLIENT.ALTERNATIVE=<a_enable>,<a_ip_address>,<a_port>
Meaning
Disables automatically connection to the alternative
server (default).
The address of this server will be used for each second
connection attempt.
$PFAL,Cnf.Set,TCP.CLIENT.ALTERNATIVE=0,217.119.194.35,2222
$PFAL,Cnf.Get,TCP.CLIENT.ALTERNATIVE
2.4.0_ -
EVISION BETA
V 1.0.0
ERSION
Page 192 of 271