Ppp.auth - FALCOM MAMBOII User Manual

C C
ONFIGURATION OMMAND
How to set/get PPP configuration:
Set configuration
Get configuration

3.2.22.4 PPP.AUTH

Parameter syntax
This parameter allows you to define the authentification method to be used over
PPP. By default, the authentification over PPP is selected automatically. However, in
some GSM networks it might be required to define the authentification method
manually.
<auth_type>
Specifies the authentification method over PPP. It can be set to:
Value
none
auto
pap
chap
How the configuration could be set/requested:
Set configuration
Get configuration
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
AUTOPING=1,300000
$PFAL,Cnf.Set,PPP.
AUTOPING
$PFAL,Cnf.Get,PPP.
PPP.AUTH=<auth_type>
Meaning
No authentification is done (NOT recommended to use
this setting).
Authentification method is selected automatically.
Only PAP authorization method is used.
Only CHAP authorization method is used.
AUTH
$PFAL,Cnf.Set,PPP.
AUTH
$PFAL,Cnf.Get,PPP.
2.4.0_ -
EVISION BETA
=auto
V 1.0.0
ERSION
Page 190 of 271