FALCOM MAMBOII User Manual page 209

C C
ONFIGURATION OMMAND
If the <conditions> field includes only STATES, the MAMBOII will execute the
specified action repeatedly while the specified condition remains true. The
combination of states with an event prevents executing of an action
permanently. You use it to specify that an action is to be repeated while some
condition remains true.
Depending on the configuration to be implemented inside the
events and states, which are available in chapter
The following table provides a set of global system events and states grouped by
major category. Some events and states might have special communication
interface requirements and others might have special design considerations. The
links in the table take you to chapter that provides overview description of these
events and states and including specific information for you to consider when
adding these events and states to your application.
Major category
System events/states
Sys.eSerialData
Sys.Device
Sys.Timer
Sys.Trigger
Sys.Counter
Sys.BT
BT.Audio
Sys.GPS
Sys.GSM
Sys.Power
Sys.Bat
Sys.UserEvent
DISPLAY events/states
Display.dialog
IO events/states
IO.Motion
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
use them with caution or in combination with just an
event. In the chapter , page
States are grouped by major category. The States are
represented with a "s" character directly after the last
dot-delimiter [.], for example Sys.Timer.s1=erased or
IO.Motion.sStanding etc..
Description
It provides the event on the serial line and
shows the event signatures.
It provides the events of the device and
shows the event signatures.
It provides the events and states of the
Timer and shows the event and state
signatures.
It provides the states of the Trigger and
shows the state signatures.
It provides the events and states of the
Counter and shows the event and state
signatures.
It provides the states of the Bluetooth and
shows the state signatures.
It provides the events and states of the
Bluetooth audio and shows the state
signatures.
It provides the events and states of the
GPS
signatures.
It provides the events and states of the
GSM
signatures.
It provides the events and states of the
Power and shows the event and state
signatures.
It provides the events and states of the
Battery and shows the event and state
signatures.
It provides the events and states of the
user commands and shows the event and
state signatures.
It provides the events and states of the
dialog box and shows the event and state
signatures.
It provides the events and states of the
device motion and shows the event and
2.4.0_ -
EVISION BETA
, "" page
module and shows the
module and shows the
V
ERSION
all firmware-supported
<conditions> field, the
, can be set.
Chapter Page
3.2.25.1.1.2.1 213
3.2.25.1.1.2.2 213
3.2.25.1.1.2.3 213
3.2.25.1.1.2.4 214
3.2.25.1.1.2.5 214
3.2.25.1.1.2.6 215
3.2.25.1.1.2.7 216
state 3.2.25.1.1.2.8 216
state 3.2.25.1.1.2.9 217
3.2.25.1.1.2.10 216
3.2.25.1.1.2.11 217
3.2.25.1.1.2.12 218
3.2.25.1.1.3 219
3.2.25.1.1.4.1 220
Page 209 of 271
1.0.0