Device.gsm.startup; Device.ieee.startup - FALCOM MAMBOII User Manual

Table of Contents

Advertisement

C
C
ONFIGURATION
OMMAND
<timeout>
It specifies the period of time in minutes on which the GPS will search for satellites
before it performs a GPS or system reset. By default, this value is set to 30. It can
also be set to a value from
<sys_reset*>
This value is optional. If it is used and the timeout has passed without having a
valid GPS fix, it forces the MAMBOII device to perform a complete system reset.
Under normal conditions do not set this value. It should be used if the MAMBOII
could not be able to get a GPS fix after several attempts.
How to set/get device configuration:
PFAL,Cnf.Set,DEVICE.GPS.TIMEOUT=1,30
Set configuration
PFAL,Cnf.Get,DEVICE.GPS.TIMEOUT
Get configuration

3.2.10.13 DEVICE.GSM.STARTUP

Parameter syntax
This parameter controls the startup behaviours of the integrated GSM engine.
<control>
Determines whether to switch on the GSM engine during startup or not. It can be
set to:
Value
auto
disable
How to set/get device configuration:
$PFAL,Cnf.Set,DEVICE.GSM.STARTUP=on
Set configuration
$PFAL,Cnf.Get,DEVICE.GSM.STARTUP
Get configuration
Notes
Note that all GSM related PFAL commands will not be executed or might
result errors and read commands (such as IMEI, SIMID OwnNumber etc.) will
not work, if GSM engine is not properly initialized and running.

3.2.10.14 DEVICE.IEEE.STARTUP

Parameter syntax
This parameter controls the operation of the IEEE component. It switches on and off
the IEEE component.
<control>
Determines whether to switch on or off the IEEE component during start-up. It
can be set to:
Value
on
off
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S
- F
R
ET
IRMWARE
to
1
DEVICE.GSM.STARTUP=<control>
Meaning
Automatically enables the GSM engine during startup. All
GSM services (SMS, voice/data calls) are available.
Disables the GSM engine during startup. It remains
powered off until it is re-enabled via PFAL command.
DEVICE.IEEE.STARTUP=<control>
Meaning
Switched on during start-up.
Switched off during start-up.
2.4.0_
-
EVISION
BETA
(greater than 1 month).
45000
V
1.0.0
ERSION
Page 153 of 271

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAMBOII and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents