FALCOM MAMBOII User Manual page 75

C C
ONFIGURATION OMMAND
DEVICE.GPS.CFG
DEVICE.GPS.TIMEOUT
DEVICE.GSM.STARTUP
DEVICE.IEEE.STARTUP
DEVICE.BT.STARTUP
DEVICE.BT.LOCALNAME
DEVICE.BT.AUDIOGW
DEVICE.PFAL.SEND.FORMAT
DISP configuration Settings
DISP.VIEW<index>
DISP.MENU<index>
DISP.PHONE<index>
DISP.COLOR<id>
DISP.FONT
DISP.MESSAGE<index>
DISP.SAVER
DISP.TZ
IEEE configuration Settings
IEEE.PANID
IEEE.KEYFOB<cnf_kf_div_index>
IEEE.IOBOX<cnf_ib_div_index>
REPLACE configuration Settings
REPLACE<index>
Optional Parameter settings
STORAGE<id>
SAVE.LASTVALID
USERTXT<text>
MACRO<index>
IO configuration setting
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
2.4.0_ -
EVISION BETA
Reads out the number of satellites that must be
available to get valid GPS fix.
Reads the timeout in minutes before MAMBOII
performs a GPS or System reset if there is no GPS
fix available.
Reads out whether the GSM engine is enabled at
boot time.
Reads out whether the IEEE module is enabled at
boot time.
Reads out whether the Bluetooth module is
enabled at boot time.
Reads out the local name of your MAMBOII used
for Bluetooth connection.
Reads out the specified MAC address and PIN
code of the used Bluetooth headset.
Reads the format of any MSG.Send command
responses.
Reads out the view assigned to the specified
index.
Reads out the menu text and command (if
available) assigned to the specified index.
Reads out the phone number assigned to a
name.
Reads out the color value assigned to each
component on the MAMBOII's screen.
Reads out the typeface of the font assigned on
the device.
Reads out the text assigned to a message index.
Reads out timeout for starting the screen saver.
Reads out how the time-zone name is converted
to local time.
Reads out the PAN (Personal Area Network)
identifier for IEEE.
Reads out the setting of connecting a Keyfob.
Reads out the setting of connecting a I/O-BOX.
Shows the text specified for replacement.
Reads out the contents of a storage index.
Reads out the last valid position stored on the
device.
Reads out the user text.
Reads out the configuration settings of a Macro.
Up to 10 macro indices in a range of 0 to 9 can
be queries.
V 1.0.0
ERSION
3.2.10.11
3.2.10.12
3.2.10.13
3.2.10.14
3.2.10.15
3.2.10.16
3.2.10.17
3.2.10.18
3.2.11.1
3.2.11.2
3.2.11.3
3.2.11.4
3.2.11.5
3.2.11.6
3.2.11.7
3.2.11.8
3.2.12.1
3.2.12.2
3.2.12.3
3.2.13.1
3.2.14.1
3.2.14.2
3.2.14.3
3.2.14.4
Page 75 of 271