FALCOM MAMBOII User Manual page 77

C C
ONFIGURATION OMMAND
TCP.CLIENT.CONNECTTCP.CLIENT
.CONNECT
TCP.CLIENT.ALTERNATIVE
TCP.CLIENT.PING
TCP.CLIENT.TIMEOUT
TCP.CLIENT.DNS.TIMEOUT
TCP.CLIENT.LOGIN
TCP.STORAGE
TCP.CLIENT.SENDMODE
TCP.SMTP.CONNECT
TCP.SMTP.LOGIN
TCP.SMTP.FROM
Geofence Configuration Settings
GF.CONFIG
GF.AREA<ID>
GF<id>
Alarm Configuration Setting
AL<index>
Notes
•
The default settings of the firmware version 2.4.0 are given in chapter
page 260.
This confidential document is a property of FALCOM and may not be copied or circulated without previous permission.
S - F R
ET IRMWARE
Table 7: The parameters grouped by major category that can be requested to get their
configuration settings.
2.4.0_ -
EVISION BETA
Reads out the address and port of the specified
remote server.
Reads out the address and port of the specified
alternative server.
Reads out whether or not ping sending is active.
Reads out the specified maximal idle time
between two ping requests.
Reads out the DNS timeout.
Reads out the specified login data for remote
server.
Shows the size of TCP storage and its operation
mode.
Shows whether the TCP transmissions
selected to fast or safe.
Reads out the address and port of the specified
SMTP server.
Reads out the login data for SMTP server
Reads out the sender email address.
Polls the global configuration
Geofences
Polls the areas configuration settings. Up to 32
areas in a range of 0 to 31 can be requested
Polls the geofence configuration settings. Up to
100 Geofence zones in a range of 0 to 99, can be
requested
Polls the alarm configuration settings. Up to 100
alarm indices in a range of 0 to 99, can be
requested.
V 1.0.0
ERSION
3.2.23.1
3.2.22.2
3.2.23.3
3.2.23.4
3.2.23.5
3.3.10.6
3.2.23.7
is
3.2.23.8
3.2.23.9
3.2.23.10
3.2.23.11
settings for
3.2.24.3
3.2.24.4
3.2.24.5
3.2.25
6.9 on
Page 77 of 271