Copy Trace - HP MC68360 User Manual

copy trace

This command copies the contents of the trace buffer to a file or to the printer.
Trace information is copied in the same format as specified in the last display trace
command.
Initial values are the same as specified by the last display trace command.
The parameters are as follows:
from_line_number
This specifies the trace list line number from which copying will begin.
<LINE#> Use this with from_line_number and thru_line_number to specify the starting
and ending trace list lines to be copied.
thru_line_number
Specifies the last line number of the trace list to include in the copied range.
Examples
copy trace to tlist <RETURN>
copy trace from_line_number 0 thru_line_number 5
to longtrac <RETURN>
See Also The display trace and store trace commands.
Chapter 11: Emulator/Analyzer Interface Commands
copy trace
313