Chapter 7: Using the Emulation-Bus Analyzer
Displaying the Trace List
•
set symbols high
•
set symbols low
•
set symbols all
When you enable symbol display, addresses and operands are replaced by the
symbols that correspond to those values. The symbol information is derived from
the SRU symbol database for that command file. See Chapter 6, "Using the
Emulator", for more information on SRU and symbol handling.
High-level symbols are those that are available only from high-level languages
such as a compiler. Low-level symbols are those that are available from assembly
language modules (which may include symbols generated internally by a compiler).
The Settings→Source/Symbol Modes..., Settings→Display Modes..., or
set symbols command remains in effect until you enter a new
Settings→Source/Symbol Modes..., Settings→Display Modes..., or set symbols
command with different options.
Refer to Chapter 6, "Using the Emulator", for details of how to set up and use the
Display Modes dialog box.
196
To display only high level symbols, enter:
To display only low level symbols, enter:
To display all symbols (both high and low level), enter: