To Load A Trace Specification - HP MC68360 User Manual

To load a trace specification

• Choose File→Load→Trace Spec... In the dialog box, click on the name of the
trace specification you want to load (placing it in the Load Trace Specification
box). Then click OK.
• Using the command line, load an existing trace specification from a file by entering:
load trace_spec <filename>
<filename> is any UNIX file name including paths. The extension .TS is assumed.
Once you save a trace specification in a file using the File→Store→Trace Spec...
or store trace_spec command, you can load it using the appropriate command
above. To start a trace with the trace specification that you loaded, use the
Trace→Again or trace again command.
Example
Load a trace specification from a file and start the trace:
load trace_spec tspec
trace again
Chapter 7: Using the Emulation-Bus Analyzer
Saving and Restoring Trace Data and Specifications
227