Table of Contents
Advertisement
Chapter 7: Using the Emulation-Bus Analyzer
Power of the Emulation-Bus Analyzer
Power of the Emulation-Bus Analyzer
The emulation-bus analyzer is a powerful tool that allows you to view the
execution of your program in real-time. Extensive triggering and sequencing
capability ensures that the analyzer captures only the information you need so you
don't spend time searching through long trace lists to find the information that is of
interest.
The Graphical User Interface has menus that let you specify some simple analyzer
measurements like tracing after, about, or before an address. You can also specify
qualifications for which states get stored and which states can be prestored; the
analyzer can prestore up to two states before each qualified store state.
The analyzer has much more capability than is available in the menus. You can
access this capability by using the command line to make your trace specifications.
Use of the command line is also covered in this chapter.
Once a trace specification command is entered, either with the menus or the
command line, it can be recalled, edited if desired, and executed again. Also, trace
specifications and trace data can be stored to files and loaded from files.
If you encounter problems when using the emulator/analyzer, refer to the chapter
titled "Solving Problems" in the MC68360 Emulator/Analyzer
Installation/Service/Terminal Interface Manual.
174
Advertisement
Table of Contents
