Step 4: Step High-Level Source Lines - HP MC68360 User Manual

Step 4: Step high-level source lines

You can step through the program by high-level source lines. The emulator
executes as many instructions as are associated with the high-level program source
lines.
1 To step a source line from the current program counter, click on the Step Source
action key.
Or, using the command line, enter:
step source <RETURN>
Notice that the highlighted bar (the current program counter) moves to the next
high-level source line.
2 Step into the "init_system" function by continuing to step source lines, either by
clicking on the Step Source action key, by clicking on the Again action key which
repeats the previous command, or by entering the step source command on the
command line.
Chapter 1: Getting Started
Step 4: Step high-level source lines
15