Table of Contents
Advertisement
Chapter 11: Emulator/Analyzer Interface Commands
display configuration_info
display configuration_info
The display configuration_info command displays information about emulator
configuration and processor SIM programming. You can also display diagnostic
information about inconsistencies found in the emulator configuration.
The parameters are as follows:
diagnostics
Checks all parts of the emulator configuration and reports any inconsistencies. It
identifies errors that result from inconsistencies between related configuration
values. These errors should be resolved in order for the emulator to operate
correctly.
This option primarily checks for inconsistencies between the mapper and the
EMSIM registers, but it also provides status messages about expectations and
limitations of the emulator of which you should be aware. (These checks are
primarily between the reset mode configuration values and the EMSIM registers.)
If no messages are returned, no inconsistencies are found in the emulator
configuration.
316
Advertisement
Table of Contents
