To Exit A Debug/Emulation Session - HP MC68360 User Manual

Chapter 3: Starting and Exiting HP 64700 Interfaces
Exiting HP 64700 Interfaces

To exit a debug/emulation session

• To exit the interface, save your configuration to a temporary file, and lock the
emulator so that it cannot be accessed by other users, choose File→Exit→Locked.
Or, in the emulator/analyzer interface command line, enter the end locked
command.
• To exit the interface and release the emulator for access by other users, choose
File→Exit→Released. Or, in the emulator/analyzer interface command line, enter
the end release_system command.
If you exit the interface locked, the interface saves the current configuration to a
temporary file and locks the emulator to prevent other users from accessing it.
When you again start the interface with the emul700 command, the temporary file
is reloaded, and therefore, you return to the configuration you were using when you
quit the interface locked.
Also saved when you exit the interface locked are the contents of the entry buffer
and command recall buffer. These recall buffer values will be present when you
restart the interface.
In contrast, if you end released, you must save the current configuration to a
configuration file (if the configuration has changed), or the changes will be lost.
48