HP MC68360 User Manual page 437

Chapter 12: Emulator Error Messages
Foreground monitor range(4Kbytes) not within map term 1 (Error 141)
Foreground monitor range(4Kbytes) not within map term 1 (Error 141)
Cause: You tried to allocate too small a space for map term 1 or you tried to place
map term 1 in target memory when you were using a foreground monitor. All of
the foreground monitor must be contained in emulation memory.
Action: Respecify map term 1 to contain at least 4 Kbytes and be sure it is located
in emulation memory.
Guarded mem break: <guarded memory address> (Async_Stat 628)
Cause: This status message indicates that the target program accessed memory
mapped as guarded and the emulator interrupted target execution and began
running in the monitor.
Handled target exception: <exception> (Error 628)
Cause: The vector base register points to the exception vector table in the
foreground monitor and the target program generated an exception that was caught
by the monitor.
Illegal base for count display (Error 1130)
Cause: When specifying the trace format, counts may only be displayed relative or
absolute. When counting states, the count is always displayed as a decimal number.
Action: Respecify the trace format without using a base for the count column. Also,
you can use ",A" to specify that counts be displayed absolute, or you can use ",R"
to specify that counts be displayed relative.
Illegal base for mnemonic disassembly display (Error 1131)
Cause: When specifying the trace format, you cannot specify a number base for the
column containing mnemonic information.
Action: Respecify the trace format without using a base for the mnemonic column.
Illegal base for sequencer display (Error 1132)
Cause: When specifying the trace format, you cannot specify a number base for the
column containing sequencer information.
Action: Respecify the trace format without using a base for the sequencer column.
417