To exit the configuration interface
• Choose File→Exit... from the pulldown menu in the top-level configuration
interface window (or type <CTRL>x).
If configuration changes have not been stored to a file, a confirmation dialog box
appears, giving you the options of: storing, exiting without storing, or canceling the
exit.
To load an existing configuration file
• In the emulator/analyzer interface, choose File→Load→Emulator Config... from
the pulldown menu, and use the file selection dialog box to specify the
configuration file to be loaded.
• Using the command line, enter the load configuration <FILE> command.
This command loads previously created and stored configuration files. You cannot
load a configuration while the configuration interface is running.
Chapter 5: Configuring the Emulator
Using the Configuration Interface
95