Modify Register - HP MC68360 User Manual

modify register

This command allows you to modify the contents of the emulation processor
internal registers.
The entry you specify for <REGISTER> determines which register is modified.
Individual fields of control registers may be modified.
Register modification cannot be performed during real-time operation of the
emulation processor. A break command or condition must occur before you can
modify the registers.
The parameters are as follows:
--EXPR--
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying a register value. For the floating-point registers, the value
is interpreted as a decimal real number. See the --EXPR-- description.
<REGISTER>
This represents the name of a register.
to
Allows you to specify the values to which the selected registers will be changed.
Examples
modify register D2 to 41H <RETURN>
See Also
The copy registers, display registers, and modify registers commands.
Chapter 11: Emulator/Analyzer Interface Commands
modify register
353