Table of Contents
Advertisement
Glossary
Absolute Count
A count in the trace list count column that indicates the total count
accumulated between the displayed state and the trigger state.
Absolute File
A file consisting of machine-readable instructions in which absolute
addresses are used to store instructions, data, or both. These files are
generated by the compiler/assembler/linker and are loaded into the
emulator.
Access Breakpoint
A break from execution of your target program to execution of the
emulation monitor when the emulator detects a read or write of an
address or range of addresses.
Access Mode
Specifies the types of cycles used to access target system memory
locations. For example a "byte" access mode tells the monitor program
to use load/store byte instructions to access target memory.
Analyzer
An instrument that captures activity of signals synchronously with a
clock signal. An emulation-bus analyzer captures emulator bus cycle
information. An external analyzer captures activity on signals external
to the emulator.
Analyzer Clock Speed
The bus cycle rate of the emulation processor. If the emulation
processor is running at 21 MHz and the fastest bus cycle requires three
clocks, then the analyzer clock speed (bus cycle rate) is 21/3 = 7 MHz.
481
Advertisement
Table of Contents
