Table of Contents
Advertisement
Chapter 11: Emulator/Analyzer Interface Commands
help
help
Displays information about system and emulation features during an emulation
session.
Typing help or ? displays softkey labels that list the options on which you may
receive help. When you select an option, the system will list the information to the
screen.
The help command is not displayed on the softkeys. You must enter it into the
keyboard. You may use a question mark in place of help to access the help
information.
The parameters are as follows:
<HELP_FILE>
This represents one of the available options on the softkey labels. You can either
press a softkey representing the help file, or type in the help file name. If you are
typing in the help file name, make sure you use the complete syntax. Not all of the
softkey labels reflect the complete file name.
Examples
help system_commands <RETURN>
? run <RETURN>
This is a summary of the commands that appear on the softkey labels when you
type help or press ?:
system_commands
run
trace
step
break
display
modify
load
store
342
Advertisement
Table of Contents
