To assign an MBAR value for the M68360 register
set
• Press the "Sync $MBAR" Action Key.
The emulator will read the value of the MBAR register in the target 68360
processor and record the value for use in defining the 68360 register set in the
emulator. A browser window will appear. It will show you the value of the target
MBAR register that was recorded by this process.
• Press the "Set $MBAR" Action Key.
A Define command file parameter dialog box will open. Enter any desired value
for the emulator's MBAR register in the dialog box. Then click OK.
The value entered should be the address portion of the MBAR register.
Chapter 6: Using the Emulator
Using the EMSIM Registers
109