Features
HP 64780A Emulator
•
25 MHz active probe emulator
•
5V and 3.3V operation
•
No wait states to target memory up to 25 MHz
•
Fast termination cycles to target memory up to 25 MHz
•
Unlimited software breakpoints
•
Symbolic support
•
36 inch cable and 219 mm (8.8") x 102 mm (4") probe, terminating in PGA
package
•
Background and foreground monitors
•
Simulated I/O with workstation interfaces
•
Consumes IEEE-695, HP-OMF, Motorola S-Records, and Extended Tek Hex
File formats directly. (Symbols are available with IEEE-695 and HP-OMF
formats.)
•
Multiprocessor emulation
– synchronous start of 32 emulation sessions
– cross triggerable from another emulator, logic analyzer, or oscilloscope
•
Demo board and self test module included
Emulation-bus analyzer
•
80-channel emulation-bus analyzer
•
Post-processed dequeued trace with symbols
•
Eight events, each consisting of address, status, and data comparators
•
Events may be sequenced eight levels deep and can be used for complex
trigger qualification and selective store
Emulation memory
•
Up to 8 Mbytes of emulation memory
•
All emulation memory is dual-ported
•
Mapping resolution is 256 bytes
•
No wait states required for emulation memory for processor speeds up to
25 MHz
•
Fast termination cycles to emulation memory supported up to 10 MHz
v