Table of Contents
Advertisement
Chapter 11: Emulator/Analyzer Interface Commands
display registers
display registers
This command displays the current contents of the emulation processor registers.
If a step command just executed, the mnemonic representation of the last
instruction is also displayed, if the current display is the register display. This
process does not occur in real-time. The emulation system must be configured for
nonreal-time operation to display registers while the processor is running. Symbols
also may be displayed in the register step mnemonic string (see set symbols).
With no options specified, the basic register class is displayed as the default. This
includes the local and global registers.
The parameters are as follows:
<CLASS>
This allows you to display a particular class of emulation processor registers.
<REGISTER>
This displays an individual register or control register field.
Examples
display registers <RETURN>
display registers BASIC D2 <RETURN>
See Also
The copy registers, modify registers, set, and step commands.
328
Advertisement
Table of Contents
