Table of Contents
Advertisement
Chapter 11: Emulator/Analyzer Interface Commands
set
Controls the display format for the data, memory, register, software breakpoint, and
trace displays.With the set command, you can adjust the display format results for
various measurements, making them easier to read and interpret. Formatting of
source lines, symbol display selection and width, and update after measurement can
be defined to your needs.
The display command uses the set command specifications to format measurement
results for the display window. Another option to the set command, <ENV_VAR>
= <VALUE>, allows you to set and export system variables to the UNIX
environment.
The default display format parameters are the same as those set by the commands:
set update
set source off symbols off
You can return the display format to this state by entering:
set default
The parameters are as follows:
default
This option restores all the set options to their default settings.
<ENV_VAR>
Specifies the name of a UNIX environment variable to be set.
=
The equals sign is used to equate the <ENV_VAR> parameter to a particular value
represented by <VALUE>.
inverse video
off
This displays source lines in normal video.
on
This highlights the source lines on the screen (dark characters on light background)
to differentiate the source lines from other data on the screen.
372
Advertisement
Table of Contents
