Connecting the Emulator to the Target
System
The 68360 emulator probe plugs into a PGA through-hole socket that is soldered
into the target system. There are three ways of connecting the 68360 emulator
probe to a target system:
•
Plug it into the PGA socket directly.
•
Plug it into the PGA socket via flexible cable.
•
Plug in a PQFP adapter socket into the PGA socket in place of the emulator,
and then connect the emulator probe to the PQFP adapter.
Chapter 2: Plugging into a Target System
Connecting the Emulator to the Target System
29