To display information about the present clock
input mode
• Choose Display→Configuration Info→Clock Input Mode from either the
configuration interface or the emulator/analyzer interface pulldown menu.
• Using the emulator/analyzer interface command line, enter the display
configuration_info clock_mode command.
The clock mode depends on the clock module installed in the emulation probe.
Refer to the Hewlett-Packard MC68360 Emulator/Analyzer
Installation/Service/Terminal Interface User's Guide for details.
To display assembly language instructions for
setting up the SIM
• Choose Display→Configuration Info→Initialization Source Code from either
the configuration interface or the emulator/analyzer interface pulldown menu.
• Using the emulator/analyzer interface command line, enter the display
configuration_info init_source_code command.
This command displays the assembly language program that will initialize the
processor as defined by the current EMSIM register contents.
Chapter 5: Configuring the Emulator
Verifying the Emulator Configuration
99