HP MC68360 User Manual page 445

Chapter 12: Emulator Error Messages
Maximum number of arguments exceeded (Error 824)
Maximum number of arguments exceeded (Error 824)
Cause: You exceeded the limit of 100 arguments per command.
Action: Reduce the number of arguments in the command.
Memory modify aborted; next address: <address> (Error 754)
Cause: One of these messages is displayed if a break occurs during processing of
the copy memory, or modify memory commands. The break could result from
any of the break conditions or could have resulted from a <CTRL> c break.
Action: Retry the operation. If breaks are occurring continuously, you may wish to
disable some of the break conditions.
Memory search aborted; next address: <address> (Error 756)
Cause: One of these messages is displayed if a break occurs during processing of
the copy memory, or modify memory commands. The break could result from
any of the break conditions or could have resulted from a <CTRL> c break.
Action: Retry the operation. If breaks are occurring continuously, you may wish to
disable some of the break conditions.
Message overflow (Status 153)
Cause: The display configuration_info diagnostics command may emit more
messages than the HP 64700 will allow (16). This status message occurs when
there are more than 16 messages.
Missing option or operand (Error 313)
Cause: You have omitted a required option to the command.
Action: Reenter the command with the correct syntax. Use online help by typing
help <command>. Refer to Chapter 11, "Emulator/Analyzer Interface
Commands", in this manual for further information on required syntax.
425