Table of Contents
Advertisement
sim_chip_selects
Display chip select information from the sim (processor) register set or the emsim
(emulator) register set. The resulting display shows:
emsim_chip
_selects
bus_interface_ports
Display bus interface information from the sim (processor) register set or the
emsim (emulator) register set. The resulting display shows the pin assignments for
embus_interface
port E.
_ports
memory_map
When in the memory map section of the emulator configuration, the ranges of
memory that have been mapped are displayed.
The memory map configuration information shows detailed information about the
memory map and information about the location of 68360 resources.
reset_mode
Displays information about the reset mode configuration value, whether it is
generated internally by the emulator or externally by the target system.
upper_address
Display the present address mode, including size of the address bus and whether
the upper address bits are used as A31-A28 or WE3-WE0. This display also
describes the distribution of address information for the address mode in use.
clock_mode
Display the present mode of clock for the 68360 target system. This mode is set by
installation of a clock module in the clock module socket on the emulation probe.
Refer to the Hewlett-Packard MC68360 Installation/Service/Terminal Interface
User's Guide manual for details.
init_source_code
Displays the assembly language program that will initialize the processor as
defined by the current EMSIM register contents.
Chapter 11: Emulator/Analyzer Interface Commands
How the chip select is assigned.
The base address.
The block size.
Other information from the option register.
display configuration_info
317
Advertisement
Table of Contents
