HP MC68360 User Manual page 303

Edit the line containing "HP64_Softkey.lines" so that it is uncommented and is set
to the new value:
!------------------------------------------------------------------------------
! The lines and columns set the vertical and horizontal dimensions of the
! main display area in characters, respectively.
! and 80 columns. These minimums are silently enforced.
!
! Note: The application cannot be resized by using the window manager.
HP64_Softkey.lines:
!HP64_Softkey.columns:
Save your changes and exit the editor.
3 If the RESOURCE_MANAGER property exists (as is the case with HP VUE — if
you're not sure, you can check by entering the xrdb -query command), use the
xrdb command to add the resources to the RESOURCE_MANAGER property. For
example:
xrdb -merge -nocpp HP64_Softkey.tmp
Otherwise, if the RESOURCE_MANAGER property does not exist, append the
temporary file to your $HOME/.Xdefaults file. For example:
cat HP64_Softkey.tmp >> $HOME/.Xdefaults
4 Remove the temporary file.
5 Start or restart the Graphical User Interface.
After you have completed the above steps, you must either start, or restart by
exiting and starting again, the Graphical User Interface. Starting and exiting the
Graphical User Interface is described in Chapter 3, "Starting and Exiting HP 64700
Interfaces".
36
85
Chapter 10: Setting X Resources
To modify Graphical User Interface resources
Minimum values are 18 lines
283