Table of Contents
Advertisement
Glossary
482
Arm Condition
A condition that reflects the state of a signal external to the analyzer.
The arm condition can be used in branch or storage qualifiers. External
signals can be from another analyzer or an instrument connected to the
CMB or BNC.
Assembler
A program that translates symbolic instructions into object code.
Background
The emulator mode in which foreground operation is suspended so the
emulation processor can be used for communication with the emulation
controller. The background monitor does not occupy any processor
address space.
Background Emulation Monitor
An emulation monitor program that does not execute as part of the user
program, and therefore, operates in the emulator's background mode.
The background monitor can execute when target program execution is
temporarily suspended. The background monitor does not occupy any
of the address space that is available to your target program.
Background Memory
Memory space reserved for the emulation processor when it is
operating in the background mode. Background memory does not take
up any of the microprocessor's address space.
BNC Connector
A connector that provides a means for the emulator to drive/receive a
trigger signal to/from an external device (such as a logic analyzer,
oscilloscope, or HP 64000-UX system).
Breakpoint
A point at which emulator execution breaks from the target program
and begins executing in the monitor. (See also Execution Breakpoint
and Access Breakpoint.)
Advertisement
Table of Contents
