Verifying The Installation - HP MC68360 User Manual

Chapter 14: Installation

Verifying the Installation

Verifying the Installation
This section shows you how to:
•
•
•
Step 1. Determine the logical name of your
emulator
The logical name of an emulator is a label associated with a set of communications
parameters in the $HP64000/etc/64700tab.net file. The 64700tab.net file is placed
in the directory as part of the installation process.
1 Display the 64700tab.net file by entering
more /usr/hp64700/etc/64700tab.net at the HP-UX prompt.
2 Page through the file until you find the emulator you are going to use.
This step will require some matching of information to an emulator, but it should
not be difficult to determine which emulator you want to address.
Examples A typical entry for a 68360 emulator connected to the LAN would appear as
follows:
#---------------------------------------------------------------------------
# Channel| Logical
# Type | Name
#---------------------------------------------------------------------------
lan: em68360
468
Determine the logical name of your emulator.
Start the emulator/analyzer interface for the first time.
Exit the emulator/analyzer interface.
| Processor | Remainder of Information for the Channel
| Type | (IP address for LAN connections)
m68360 21.17.9.143