HP MC68360 User Manual page 444

Chapter 12: Emulator Error Messages
Label not defined: <label> (Error 321)
Label not defined: <label> (Error 321)
Cause: You entered an analyzer expression in which the label was not present in
the analyzer label list. For example, if the label list includes address, data, and
status, you might have entered something such as lowerdata=24t. This error also
occurs if you try to delete a label that does not exist.
Action: You can reenter the command, using one of the previously defined labels,
and adjust the expression as necessary to accommodate the fit of that label to the
analyzer input lines. You can also define a new label using the tlb command, and
then reenter the analyzer command using the newly defined label.
Map range overlaps with term: <term number> (Error 734)
Cause: You entered a map term whose address range overlaps with one already
mapped.
Action: Reenter the map term so that ranges do not overlap, or combine terms and
change the memory type.
Macro buffer full; macro not added (Error 809)
Cause: This error occurs when the memory reserved for macros is all used up.
Action: You must delete macros to reclaim memory in the macro buffer.
Map term 1 type conflict with foreground monitor, must be eram (Error 141)
Cause: You tried to specify map term 1 as emulation ROM when you were using a
foreground monitor. The foreground monitor must be mapped into emulation
RAM type memory (not emulation ROM).
Action: Respecify map term 1 to ensure it is RAM memory space in emulation
memory.
Maximum argument buffer space exceeded (Error 826)
Cause: You exceeded the space limits for argument lists.
Action: Reenter the command with less arguments, or simplify the expressions in
the arguments.
424