Table of Contents
Advertisement
external
binary
Displays the external analyzer trace list in binary format.
<external
This option displays a defined external analyzer label.
_label>
hex
Displays the external analyzer trace list in hexadecimal format.
off
Use this option to turn off the external trace list display.
then
This allows you to display multiple external analysis labels. This option appears
when more than one external analyzer label is in use.
<LINE#>
This prompts you for the trace list line number to be centered in the display. Also,
you can use <LINE#> with disassemble_from_line_number. <LINE#> prompts
you for the line number from which the inverse assembler attempts to disassemble
data in the trace list.
mnemonic
Lists trace information with opcodes in mnemonic format.
offset_by
This option allows you to offset the listed address value from the address of the
instruction. By subtracting the offset value from the physical address of the
instruction, the system makes the listed address match that given in the assembler
or compiler listing.
This option is also useful for displaying symbols and source lines in dynamically
relocated programs.
Note that when using the set source only command, the analyzer may operate
more slowly than when using the set source on command. This is an operating
characteristic of the analyzer:
In conclusion, you should not set the trace list to set source only when tracing
assembly code. This will result in optimum analyzer performance.
Chapter 11: Emulator/Analyzer Interface Commands
When you use the command set source on, and are executing only assembly
language code (not high-level language code), no source lines are displayed.
The trace list will then fill immediately with the captured assembly language
instructions.
When using set source only, no inverse assembled code is displayed.
Therefore, the emulation software will try to fill the display with high-level
source code. This requires the emulation software to search for any captured
analysis data generated by a high-level language statement.
display trace
333
Advertisement
Table of Contents
