Configuring Emsim Register Values; To Copy Target Sim Registers To Emsim Registers; To Manually Define Emsim Values - HP 16600A Series User Manual

Configuring EMSIM Register Values

There are two methods you can use to configure EMSIM register
values:
• Copy values from the SIMs into the EMSIM registers, or
• Manually define each of the EMSIM values.
This will not change the value of the SIM registers.
To copy target SIM registers to EMSIM
registers
If you have initialization code that properly defines the SIMs, you can
copy your values of the SIMs into the EMSIM registers. Then you can
save the EMSIM values in a configuration file.
Using the Emulation Control Interface:
• In the Configuration window, click the
button.
Using the emulator's built-in commands:
• Enter the sync sim command.

To manually define EMSIM values

Using the Emulation Control Interface:
1 Open the Configuration window.
2 Enter the values for the registers.
Solutions for CPU32
Chapter 7: Using Internal Registers (SIM and EMSIM Registers)
Configuring EMSIM Register Values
Read Configuration
163