Table of Contents
Advertisement
Chapter 5: Configuring the Emulator
Verifying the Emulator Configuration
To display information about the reset mode
configuration
• Choose Display→Configuration Info→Reset Mode Value from either the
configuration interface or the emulator/analyzer interface pulldown menu.
• Using the emulator/analyzer interface command line, enter the display
configuration_info reset_mode command.
The display will show data bus size and global chip select memory access size.
To review the upper address mode of the present
configuration
• Choose Display→Configuration Info→Upper Address Mode from either the
configuration interface or the emulator/analyzer interface pulldown menu.
• Using the emulator/analyzer interface command line, enter the display
configuration_info upper_address command.
This selection will show whether the upper address bits are used as A31-A28 or
WE3-WE0.
98
Advertisement
Table of Contents
