Pod_Command - HP MC68360 User Manual

The parameters are as follows:
keyboard
Enters an interactive mode where you can simply type Terminal Interface
commands (unquoted) on the command line. Use display pod_command to see
the results returned from the emulator.
<POD_CMD> Prompts you for a Terminal Interface command as a quoted string. Enter the
command in quotes and press <RETURN>.
suspend
This command is displayed once you have entered keyboard mode. Select it to
stop interactive access to the Terminal Interface and return to the Graphical User
Interface or Softkey Interface.
Examples
This example shows a simple interactive session with the Terminal Interface.
display pod_command <RETURN>
pod_command keyboard <RETURN>
cf <RETURN>
tsq <RETURN>
tcq <RETURN>
Enter suspend to return to the Graphical User Interface or Softkey Interface.
See Also The display pod_command command.
Also see the Hewlett-Packard M68360 Emulator/Analyzer
Installation/Service/Terminal Interface User's Guide and the Terminal Interface
on-line help information.
Chapter 11: Emulator/Analyzer Interface Commands

pod_command

361