HP MC68360 User Manual page 378

Chapter 11: Emulator/Analyzer Interface Commands
performance_measurement_initialize
duration This option sets the measurement mode to "duration." Time ranges will default to a
predetermined set (unless a user-defined file of time ranges is specified).
<FILE> This represents a file you specify to supply user-defined address or time ranges to
the emulator.
global_symbols This option specifies that the performance measurement will be set up with the
addresses of all global symbols and procedures in the source program.
local_symbols_in This causes addresses of the local symbols to be used as the default ranges for the
measurement.
restore
This option restores old measurement data so that a measurement can be continued
when using the same trace command as previously used.
--SYMB--
This represents the source file that contains the local symbols to be listed. This
also can be a program symbol name, in which case all symbols that are local to a
function or procedure are used. See the SYMB syntax diagram.
Examples
performance_measurement_initialize <RETURN>
performance_measurement_initialize duration <RETURN>
performance_measurement_initialize local_symbols_in
mod_name <RETURN>
See Also
The performance_measurement_run and performance_measurement_end
commands.
Refer to Chapter 8, "Making Software Performance Measurements" for examples
of performance measurement specification and use.
358