HP MC68360 User Manual page 503

Command File
A file containing a sequence of commands to be executed.
Compatible Mode
The compatible mode of the deep analyzer configures the analyzer to
provide the same memory depth as the 1K analyzer: 1024 states deep
when the analyzer is not configured to make a count of states or time
during a measurement, and 512 states deep when the analyzer is
configured to make a count of states or time during a measurement. If
the emulator interface you are using along with the deep analyzer
requires that you use the compatible mode, the deep analyzer will still
be able to provide one of its benefits for your measurement; you will be
able to make your counts of states or time at full emulator clock speed.
Compiler
A program that translates high-level language source code into object
code, or produces an assembly language program with subsequent
translation into object code by an assembler. Compilers typically
generate a program listing which may list errors displayed during the
translation process.
Counter Overflow
When the counter reaches maximum count and begins a new count
from zero. The counter of the deep analyzer simply counts
continuously once a trace begins; it increments its count every 20 ns,
and reaches maximum count in about 22.9 minutes (22 minutes and 54
seconds). The deep analyzer sets a flag in memory and stores it along
with the first state that is captured after the counter overflow occurs
(first state captured after the counter begins again at zero).
Configuration File
A file in which configuration information is stored. Typically,
configuration files can be modified and re-loaded to configure
instruments (such as an emulator) or programs (such as the PC
Interface).
Glossary
483