HP MC68360 User Manual page 331

The parameters are as follows:
--EXPR--
An expression is a combination of numeric values, symbols, operators, and
parentheses, specifying a memory address or offset value. See the EXPR syntax
diagram.
FCODE The function code used to define the address space being referenced. See the
syntax diagram for FCODE to see a list of the function codes available and for an
explanation of those codes.
,
A comma used immediately after memory in the command line appends the
current copy memory command to the preceding display memory command. The
data specified in both commands is copied to the destination specified in the
current command. Data is formatted as specified in the current command. The
comma is also used as a delimiter between values when specifying multiple
memory addresses.
Examples
copy memory start to printer <RETURN>
copy memory 0 thru 100h , start thru +5 , 500H ,
target2 to memlist <RETURN>
copy memory 2000h thru 204fh to memlist <RETURN>
See Also The display memory, modify memory, and store memory commands.
Chapter 11: Emulator/Analyzer Interface Commands
copy memory
311