Commands - HP MC68360 User Manual

Chapter 11: Emulator/Analyzer Interface Commands

Commands

Emulator/analyzer interface commands are summarized in the table below and
described in the following pages.
!UNIX_COMMAND
bbaunload
break
3
cd (change directory)
cmb_execute
3
<command file>
copy configuration_info
4
copy data
copy display
copy error_log
copy event_log
copy global_symbols
copy help
copy local_symbols_in
4
copy memory
copy pod_command
1
copy registers
copy software_breakpoints
copy status
copy trace
cws(change working symbol)
display configuration_info
4
display data
1
This option is not available in real-time mode.
2
This is only available when simulated I/O is defined.
3
These commands are not displayed on softkeys.
4
This option is not available in real-time mode if addresses are in user memory.
302
display error_log
display event_log
display global_symbols
display local_symbols_in
4
display memory
display pod_command
1
display registers
display simulated_io
display software_breakpoints
display status
display trace
end
forward
3
help
load <absolute_file>
load configuration
load emul_mem
load trace
load trace_spec
load user_memory
3 3
log_commands
modify configuration
modify keyboard_to_simio
modify memory
modify register
modify software_breakpoints
name_of_module
performance_measurement_end
performance_measurement_init
performance_measurement_run
2
pod_command
pwd (print working directory)
pws (print working symbol)
reset
run
set
specify
step
stop_trace
store memory
store trace
store trace_spec
sync_sim_registers
trace
3
wait
2
4
1
1
3
3
3
1