To Use Simulated I/O Keyboard Input - HP MC68360 User Manual

Examples
A message tells you whether the display is open or closed. You can modify the
configuration to enable status messages.

To use simulated I/O keyboard input

• To begin using simulated I/O input, choose Settings→Simulated IO Keyboard.
• To end simulated I/O and return to using the interface, use the suspend softkey.
The command line entry area is used for simulated input with the keyboard.
Therefore, if the command line is turned off, choosing this menu item with turn
command line display back on.
If you are planning to use even a modest amount of simulated I/O input during an
emulation session, it might be a good idea to open another Emulator/Analyzer
window to be used exclusively for simulated I/O input and output.
Chapter 6: Using the Emulator
Using Simulated I/O
171