Table of Contents
Advertisement
Chapter 12: Emulator Error Messages
Invalid base: <base> (Error 319)
Invalid base: <base> (Error 319)
Cause: This error occurs if you have specified an invalid base when entering a
command to change the format of the trace list.
Action: Use the help screens to view the valid base options.
Invalid clock channel: <name> (Error 1207)
Cause: Valid clock channels are L, M, and N.
Action: Respecify the command using valid clock channels.
Invalid command group: <group name> (Error 801)
Cause: This error occurs when you specify an invalid group name in the help
<group> command.
Action: Enter the help command for a listing of the valid group names.
Invalid configuration item: <item> (Error 627)
Cause: You specified a non-existent configuration item.
Action: Use the help screen to see valid items. Reenter the command, specifying
only configuration items that are supported by your emulator. Refer to Chapter 5,
"Configuring the Emulator", in this manual.
Invalid count: <count> (Error 315)
Cause: This error occurs when the emulation system expects a certain number (of
arguments, for example), but you specify a different number.
Action: Enter the number the system expects to receive.
Invalid disassembler option: <option> (Error 1001)
Cause: You specified an invalid option for the disassembler. The disassembler can
display all bus cycles, display only instruction cycles, dequeue the trace list, not
dequeue the trace list, and disassemble starting with the lower word of the
instruction.
Action: Use valid inverse assembly options in your command.
420
Advertisement
Table of Contents
