HP MC68360 User Manual page 436

Chapter 12: Emulator Error Messages
FATAL SYSTEM SOFTWARE ERROR (Error 204)
FATAL SYSTEM SOFTWARE ERROR (Error 205)
FATAL SYSTEM SOFTWARE ERROR (Error 204)
FATAL SYSTEM SOFTWARE ERROR (Error 205)
FATAL SYSTEM SOFTWARE ERROR (Error 208)
Cause: The system has encountered an error from which it cannot recover.
Action: Write down the sequence of commands that caused the error. Cycle power
on the emulator and reenter the commands. If the error repeats, call your local HP
Sales Office for assistance.
File could not be opened
Cause: The file cannot be opened or created for writing.
Action: Check to make sure that the parent directory for the file has correct
permissions set.
File transfer aborted (Error 410)
Cause: A transfer operation was aborted due to a break received, most likely a
<CTRL> c from the keyboard. If you typed <CTRL> c, you probably did so
because you thought the transfer was about to fail.
Action: Retry the transfer, making sure to use the correct command options. If you
are unsuccessful, make sure the data communications parameters are set correctly
on the host and on the HP 64700; then retry the operation.
Foreground monitor handled an exception: vector offset 8 (Async_Err 152)
Cause: The foreground monitor handled an exception while performing a monitor
command (such as read/write user memory).
Action: Verify memory operation and retry your command.
Foreground monitor not mapped into emulation memory (Error 141)
Cause: You tried to map the foreground monitor into memory space that is not
mapped as emulation memory. The foreground monitor must be mapped into
emulation memory space.
Action: Respecify map term 1 to be located in emulation memory space.
416