If you are having problems tracing
• Check the emulator configuration. Choose Modify→Emulator Config.... Then in
the Emulator Pod Settings dialog box:
•
You may need to select Clock 01 Drive to Target = Buffered.
•
You may need to select Buffer AS, DS and R/W = Yes.
Interaction problems between the emulator and the target system may affect
tracing. These problems may be overcome by selecting proper buffering of the
emulator signals.
• To obtain a trace, the analyzer must receive CLK01, and the clock must meet
normal clock specifications.
•
Perhaps your target system is degrading the clock so that it does not meet
specifications.
•
Perhaps the target system is interfering with proper operation of CLK01.
Without CLK01, no trace can be taken by the analyzer.
Chapter 7: Using the Emulation-Bus Analyzer
Making Simple Trace Measurements
185