Configuring Intelligent Multicasting; Configuring Global Intelligent Multicasting - Avaya Cajun P882 User Manual

Multiservice switch

Hide thumbs Also See for Cajun P882:

Table of Contents

Configuring Intelligent Multicasting

Using the Web

Avaya P550R, P580, P880, and P882 Multiservice Switch User Guide, v5.3.1

LGMP and CGMP are similar protocols. Both protocols have a server

implementation that runs on a switch that implements the Learning

Process, and both protocols have a client implementation which

runs on switches that do not have local IP interfaces on all involved

VLANs. For the Avaya Multiservice switch, only the client

implementation of CGMP is available in case the switch is connected

to a Cisco router. This implementation is called CGMP Snooping.

* Note: IGMP Snooping must be enabled to learn the sessions

that the LGMP server will disseminate. An LGMP server

is active only for VLANs that have an IGMP interface

This section provides the following procedures:

Configuring Global Intelligent Multicasting

Displaying Router Ports

Configuring Static Router Ports

Searching for Intelligent Multicast Sessions

Deleting an Intelligent Multicast Session

Deleting a Multicast Session Client Port

Creating a Static Multicast Session

Deleting Static Multicast Sessions

Creating Static Client Ports

Deleting Static Client Ports

You can configure intelligent multicasting globally using either the

Web Agent or the CLI.

To configure intelligent multicasting globally using the Web Agent:

1. Select Global Configuration from the Layer 2 Switching >

Intelligent Multicast group on the Web Agent window. The

Intelligent Multicast Global Configuration dialog box opens

(Figure 16-2).

Managing Intelligent Multicasting

P550r P580 P880