Displaying Counter Information For A Physical Port; Displaying Counter Information For All Physical Ports - Avaya M770 User Manual

Displaying Counter Information for a Physical Port

You can view general counter information for all physical ports by using the
command: pport show counters.
There are two additional counter commands available only for DS3 modules that
will display DS3-specific counter information:
• pport show ds3counters
• pport show plcpcounters

Displaying counter information for all physical ports

To display counter information for all physical ports, enter the pport show
counters command.
Command:
Output:
The pport show counters command displays the information described in
Table 5.2.
Table 5.2
Field
Port Id
Tx Cells
Rx Cells
Tx Discards
Rx Discards
Avaya M770 ATM Switch User's Guide
M4-DS3s8:/>pport show counters
Physical Port Counters
----------------------
Port
ID Cells
8.0 151971 128993
8.1
8.2
8.3 279163 101045
8.4 310163 131011
(Port 5 = Backplane, Port 0 = Cpu)
Output from the pport show counters command
Description
The physical port. This is displayed in the format <slot>.<port>
The number of cells that have been transmitted through the
physical port.
The number of cells that have been received through the physical
port.
The number of transmitted cells that have been discarded.
The number of received cells that have been discarded.
Chapter 5
Tx Rx Tx
Cells Discar Discar
ds
0
0 0 0
0 0 0
0
0
Managing Physical Ports
Rx Rx
Errors
ds
0 0
0 0
0 0
0 0
0 0
43