Description (Ospf/Ospf Area View) - HP 6125G Command Reference Manual

routing policy is matched, regardless of whether a default route exists in the routing table, and the routing
policy modifies some values in the Type-5 LSA.
type type: Specifies a type for the Type-5 LSA: 1 or 2. If type is not specified, the default type for the
Type-5 LSA specified by the default type command applies.
summary: Advertises the Type-3 summary LSA of the specified default route.
Description
Use default-route-advertise to generate a default route into the OSPF routing domain.
Use undo default-route-advertise to disable OSPF from distributing a default external route.
By default, no default route is distributed.
The default-route-advertise summary cost command is applicable only to VPNs, and the default route is
redistributed in a Type-3 LSA. The PE router advertises the redistributed default route to the CE router.
Using the import-route command cannot redistribute a default route. To redistribute a default route, use
the default-route-advertise command.
If neither the always nor permit-calculate-other keyword is specified, the router generates a default route
in a Type-5 LSA into the OSPF routing domain only when an active default route that does not belong to
the current OSPF process exists in the IP routing table. The router then does not calculate default routes
from other routers.
Related commands: import-route and default.
Examples
# Generate a default route in an ASE LSA into the OSPF routing domain, regardless of whether the
default route is available in the routing table.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default-route-advertise always

description (OSPF/OSPF area view)

Syntax
description description
undo description
View
OSPF view/OSPF area view
Default level
2: System level
Parameters
description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in OSPF
area view. description is a string of up to 80 characters.
Description
Use description to configure a description for an OSPF process or area.
Use undo description to remove the description.
No description is configured by default.
64