Display Ospfv3 Interface - HP 5920 Series Command Reference Manual

Field
Source
Destination

display ospfv3 interface

Use display ospfv3 interface to display OSPFv3 interface information.
Syntax
display ospfv3 [ process-id ] interface [ interface-type interface-number | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information about all OSPFv3 interfaces.
Usage guidelines
If no process is specified, this command displays brief OSPFv3 interface information for all processes.
If you do not provide the interface-type interface-number argument or the verbose keyword, this
command displays brief information about all OSPFv3 interfaces.
Examples
# Display OSPFv3 information about VLAN-interface 1.
<Sysname> display ospfv3 interface vlan-interface 1
Area: 0.0.0.0
-------------------------------------------------------------------------
Vlan-interface1 is up, line protocol is up
Interface ID 65697
IPv6 prefixes
fe80::200:12ff:fe34:1
2001::1
Cost: 1
Priority: 1
Designated router: 2.2.2.2
Backup designated router: 1.1.1.1
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit delay 1
Neighbor count is 1, Adjacent neighbor count is 1
OSPFv3 Process 1 with Router ID 1.1.1.1
Instance ID 0
(Link-Local address)
State: BDR Type: Broadcast
Description
Source address of the sham link.
Destination address of the sham link.
MTU: 1500
461