Display Isis Interface - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Field
Restart t3
SA Bit
Total number of interfaces
Number of waiting LSPs

display isis interface

Use display isis interface to display IS-IS interface information.
Syntax
display isis interface [ [ interface-type interface-number ] [ verbose ] | statistics ] [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Displays statistics of a specified IS-IS interface.
verbose: Displays detailed information about an interface. If this keyword is not specified, this command
displays brief information about an interface.
statistics: Displays IS-IS interface statistics.
process-id: Displays IS-IS interface information for an IS-IS process specified by its ID in the range of 1 to
65535.
Usage guidelines
If no interface is specified, the command displays information about all interfaces.
If no IS-IS process is specified, the command displays all interface information for all processes.
Examples
# Display brief IS-IS interface information.
<Sysname> display isis interface
Interface:
Id
001
# Display detailed IS-IS interface information.
Interface information for IS-IS(1)
----------------------------------
Vlan-interface12
IPv4.State
IPv6.State
Up
Description
T3 timer, in seconds.
Whether SA is supported:
Supported.
Not supported.
Total number of IS-IS interfaces.
Number of LSPs not obtained by the GR Restarter from
GR Helpers during LSDB synchronization.
MTU
Type
Down
547
L1/L2
141
DIS
Yes/No

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents