Light / Bulb - TGB 525 Service Manual

Light / Bulb

Replacing Bulb for Headlight
Remove waterproof cover for the headlight.
Remove bulb setting hook.
Take out the bulb connector and the bulb. Replace
with new bulb if necessary.
(Main beam H3 12V 55W)
(Dipped 12V 55W)
Caution
● Never touch the bulb with finger, which will
create a heat point.
● Clean the fingerprint left on the bulb with
alcohol.
Install the bulb of the headlight in reverse order of
removal.
Upon completion of replacement, turn on the main
switch to ensure the headlight works well.
Adjust the beam and distance of the headlight if
necessary.
PDF created with pdfFactory Pro trial version
To this chapter contents
www.pdffactory.com
17. ELECTRICAL SYSTEM
17-13