Removal Of Flywheel Magneto; Removal Of Starter Motor - TGB Hornet 50 Service Manual

4-3-1 Disassembly of Engine:
(Removal of Flywheel Magneto and Starter Motor)

5. Removal of Flywheel Magneto:

A. Remove the Screw of Air Filter and remove the air filter.
B. Remove the Screw of Fan-Cowling and remove Fan-Cowling.
C. Remove the Screw of Cooling Fan and remove the Cooling-Fan and Fan Case.
D.Tools should be adopted to prevent the rotation of Flywheel Magneto.
Remove Flange Nut of Flywheel Housing.
Special Tools: GA5000051F04
E. Apply tools to lock on the thread hole of Flywheel Housing, hook the end of Crank
Shaft and remove the Flywheel Housing
Special Tool: GA5000051F22
F. Remove Key.
G. Disassemble Screw of Coil and remove the coil.

6. Removal of Starter Motor:

A. Remove the Screw (1) of Starter. Motor and remove the Starter Motor.
B. Remove the Drive Gear
C. Remove the Screw (2) of Idling Gear Cover.
D. Remove the Idling Gear Cover (3) and Speed clutch (4).
47